UA-669938-1

FastFerment Conical Fermenter

Product Code: ffcf
Availability: In Stock
$99.99
Qty:
 
Price:
7.9 gallon conical style fermenter. Used for fermentation of beer and wine.

Easy & Efficient

The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80% of the time & labor needed to make a batch of beer or wine compared to traditional methods. With less equipment, clean up is easy.

Premium

FastFerment is a professional system for the average Homebrewer & Winemaker. The conical design limits exposure to oxygen & allows for yeast harvesting. The end result is consistent high quality batches of beer & wine.

Benefits Over Traditional Conicals

The downfall of other conical fermenters is that you have to ferment the product with the valve closed and then the sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the sediment out the bottom. This results in two main issues:
  1. You need to time the flushing of the sediment perfectly to ensure minimal loss of product.
  2. As the sediment is flushed out, there will always be yeast and the sediment hazes that float up into the product remaining in the unit.
Most conical fermenters cost $100s if not $1000s! The FastFerment MSRP is $100 USD
 

Why Use FastFerment?

  1. Guaranteed Consistent Batches
  2. Primary & Secondary Fermentation in the Same Container
  3. No Transfers & No Racking - 80% Less Work
  4. Better Quality Product with No Sediment Contamination
  5. Increased Sanitation with Less Contamination
  6. Less Oxygen Exposure
  7. Ability to Harvest Yeast & Save for Reuse

New Features and Benefits

  1. Easy Cleaning and Batch Stirring - 6" (15cm) removable screw top
  2. Total Capacity 7.9 US Gallons/ 30 Litres - Made for 5 - 7 Gallon batches with blow offs
  3. Easy Wall Mounting System - Mounts to standard 16" (40cm) wall studs
  4. 33% Bigger Valve for Increased Flow Rate - 1" (2.5cm) Bottom valve compared vs. 3/4" (2cm)
  5. Collection Ball for Yeast Harvesting - Save $100's & harvest your Yeast Strains!
  6. Temp. Monitoring Capabilities - ThermoWell included - Thermometer Avail.

Kit Contents

  1. One 7.9 US Gallon / 30 Litre Conical Fermenter
  2. 6" (15cm) Screw Top, Grommet & Airlock
  3. Bottom Collection Ball For Harvesting Yeast
  4. 1" Union Teflon Valve and fittings
  5. Wall Mounts (2), Mounting Bolts & Anchors (4)
  6. 1/2" (1.25cm) PVC Hose (2' /60cm) & Hose Clamp
  7. Permanent Thermowell for Temperature Monitoring
  8. Instructions

Specifications

  1. Made with HDPE: Food Grade
  2. Heights
    On wall mounts from bottom of collection ball:
    In the Stand:
    • To top of Airlock: 35.5", 90cm
    • To top of Lid: 32", 81cm
    • To top of Airlock: 37", 94cm
    • To top of Lid: 33.5", 85cm
  3. Widths
    • With Wall Mounting Bolts: 14.75", 37.5cm
    • Without Wall Mounting Bolts: 14.25", 36cm
  4. 7.9 US Gallons/ 30 Litres
  5. 1" (2.5cm) Teflon Seated Union Valve
    1. 6" (15cm) Removable Screw Top Lid

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: